Vi-ta [vee-tuh]

Critical Embedded Systems
are everywhere . . .

Become a leader in setting new directions!

Call for Participation

<< First  < Prev   1   2   Next >  Last >> 
  • Wednesday, April 19, 2017 5:15 AM | Jerry Gipper (Administrator)

    The VITA Standards Organization (VSO) plans to submit the following standards for ANSI Stabilized Maintenance Accreditation

    1. ANSI/VITA 41.0-2006 (R2011), VXS VMEbus Switched Serial Standard
    2. ANSI/VITA 41.1-2006 (R2011), VXS 4X InfiniBand (TM) Protocol Layer Standard
    3. ANSI/VITA 41.2-2006 (R2011), VXS 4X Serial RapidIO Protocol Layer Standard
    4. ANSI/VITA 42.1-2006 (R2012), XMC Switched Mezzanine Card: Parallel RapidIO 8/16 LP-LVDS Protocol Layer Standard
    5. ANSI/VITA 42.2-2006 (R2012), XMC Serial RapidIO Protocol Layer Standard

    Stabilized Maintenance Accreditation is used for standards that currently holds the status of American National Standard and has been reaffirmed at least once; and at least ten years have passed since the approval or last revision of the standard as an ANS; and the standard is required for use in connection with existing implementations or for reference purposes.

    As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standard in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director at admin@vita.com, for details to register. Registration for the ballot will close May 5, 2017.

  • Wednesday, April 19, 2017 5:11 AM | Jerry Gipper (Administrator)

    The VITA Standards Organization (VSO) plans to submit the following standards for ANSI Stabilized Maintenance Accreditation

    VITA 67.3-2017x, Coaxial Interconnect on VPX, Spring-Loaded Contact on Backplane

    Abstract: This document describes an open standard for configuration and interconnect within the structure of VITA 67.0 enabling an interface compatible with VITA 46 containing multi-position blind mate analog connectors with SMPM style contacts having fixed contacts on the Plug-in Module and spring action on the backplane.

    As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standard in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director at admin@vita.com, for details to register. Registration for the ballot will close May 5, 2017.

  • Wednesday, December 07, 2016 12:07 PM | Jerry Gipper (Administrator)

    The VITA Standards Organization (VSO) plans to submit the following standard for ANS Accreditation:

    VITA 49.2 (new Standard), VITA Radio Transport (VRT) Standard for Electromagnetic Spectrum: Signals and Applications

    Abstract:

    The VITA 49.2 standard, which is part of the VITA Radio Transport (VRT) family of standards, defines a signal/spectrum protocol that expresses spectrum observation, spectrum operations, and capabilities of RF devices. This is done independent of manufacturer, equipment type, point of use in an architecture and application. The intent of the VRT protocol is to enable RF systems to migrate from proprietary stove-pipe architectures to interoperable multi-function architectures.

    As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standard in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close December 21, 2016.

  • Monday, November 28, 2016 8:03 AM | Jerry Gipper (Administrator)

    The VITA Standards Organization (VSO) plans to submit the following standard for ANSI Stabilized Maintenance:

    1. ANSI/VITA 41.0-2006 (R2011) VXS VMEbus Switched Serial Standard
    2. ANSI/VITA 41.1-2006 (R2011) VXS 4X InfiniBand (TM) Protocol Layer Standard
    3. ANSI/VITA 41.2-2006 (R2011) VXS 4X Serial RapidIO Protocol Layer Standard

    Also, VSO plans to submit the following standard for ANSI Reaffirmation:

    1. ANSI/VITA 61.0-2011 XMC 2.0
    2. ANSI/VITA 66.1-2012 Optical Interconnect on VPX - MT Variant

    As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standard in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close 14 days from now.

  • Monday, November 28, 2016 7:52 AM | Jerry Gipper (Administrator)

    The VITA Standards Organization (VSO) plans to submit the following standard for ANSI Accreditation:

    VITA 48.8, Mechanical Standard for Electronic VPX Plug-in 4 Modules Using Air Flow Through Cooling

    This document describes an open standard for the design requirements for an air- flow-through cooled plug-in module having 3U and 6U form factors while retaining the VITA 46.0 connector layout. Unlike using cooling air impinged directly upon the components and circuit boards, this plug-in module uses a finned heat exchanger frame located within the central section of the assembly to top cool primary circuit board components as well as mezzanine board components. Both 3U and 6U standard form factors are offered using 3 defined pitch spacings, with options to have alternate air flow intake and exhaust paths. The plug-in modules of this standard exhibit a weight reduction and cost savings by eliminating both wedge retainer usage and module lever usage by way of using light weight jack screws for plug-in module insertion and extraction into a subrack chassis. The intention of this standard is to optimize SWAP-C (Size, Weight, Power, Cost).

    As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standard in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close 14 days from now.

  • Thursday, April 14, 2016 4:12 PM | Jerry Gipper (Administrator)

    The VITA Standards Organization (VSO) plans to submit the following standard for ANSI Stabilized Maintenance:

    ANSI/VITA 20-2001 (R2011), Conduction Cooled PMC

    This standard defines the methodology and implementation details to allow the creation of conduction cooled PMC modules to ensure electrical and physical compatibility with various host card modules onto which conduction cooled PMCs are mounted.

    As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standard in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close Monday May 2, 2016.

  • Monday, February 08, 2016 11:54 AM | Jerry Gipper (Administrator)

    The VITA Standards Organization (VSO) has voted to submit the following draft standard for ANSI accreditation:

    VITA 66.4 (201x) (New Standard), Optical Interconnect On VPX – Half Width MT Variant

    • This document describes an open standard to define a Half Width MT style contact variant within the VITA 66 family of blind mate Fiber Optic interconnects for use with VPX backplanes and plug-in modules.

    As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standards in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close Monday Feb 22, 2016. 

  • Monday, January 11, 2016 9:14 AM | Jerry Gipper (Administrator)

    The VITA Standards Organization (VSO) has voted to submit the following draft standard for ANSI accreditation:

    • Revised ANSI/VITA 42 XMC Switched Mezzanine Card Auxiliary Standard
    • Revised ANSI/VITA 51.2 Physics of Failure Reliability Predictions 
    • Reaffirm ANSI/VIT 48.5 Mechanical Standard for Electronic Plug-in units Using Air Flow Through Cooling

    As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standards in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close Tuesday Jan 26, 2015.
     

  • Monday, January 04, 2016 4:14 PM | Jerry Gipper (Administrator)

    VITA 62.0-201x (Revision), Power Supply Standard

    This proposed standard will provide guidelines to building a power supply module that can be used to power a VPX chassis. The module will fit within the standard envelope defined for VPX modules using the VITA 48 specifications.

    As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standards in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close Tuesday Jan 19, 2015.

  • Wednesday, September 23, 2015 1:25 PM | Jerry Gipper (Administrator)

    The VITA Standards Organization (VSO) has voted to submit the following draft standards for ANSI accreditation:

    • ANSI/VITA 42.0-2008 (R2014) (Revision), XMC Switched Mezzanine Card Auxiliary Standard
    • ANSI/VITA 51.2-2011 (Revision), Physics of Failure Reliability Predictions
    • ANSI/VITA 53.0-2010 (Reaffirmation), Standard for Commercial Technology Market Surveillance
    • ANSI/VITA 48.5-2010 (Reaffirmation), Mechanical Standard for Electronic Plug-in units Using Air Flow Through Cooling

    As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standards in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register.

    Registration for the ballot will close Friday Oct 9, 2015.

<< First  < Prev   1   2   Next >  Last >> 

Comments on this website? Email us at webmaster@vita.com

Copyright © 1996-2017, VITA. All rights reserved.

VITA Copyright and Use Notice

Powered by Wild Apricot Membership Software